P Hook and Q Hook: Frequently Asked Questions

Short, direct answers to the questions buyers actually ask before ordering p hook and q hooks — collected from the specification, pricing and inspection questions that come up in real enquiries. Where an answer depends on your site conditions, the condition is stated rather than hidden.

Product questions

Why does a simple hook cost more than the plated version?

You are paying for the sheath tooling and the compound. A single over-mould tool can add four figures, which is why suppliers push a small number of standard barrel sizes.

Is LSZH worth specifying?

Yes for indoor runs in tunnels, cabinets and public buildings — PVC releases acidic smoke in a fire, and many operators now write LSZH into the indoor portion of the specification even where the outdoor portion is PVC.

Ordering questions

What is the typical minimum order and lead time for p hook and q hook?

The usual minimum is 3,000 pcs per colour and size, and repeat specifications run 18–30 days including sheath tooling for a new size. First orders with new tooling or custom colours sit at the long end of that range; stock configurations sit at the short end.

How should p hook and q hook be packed for export?

200 pcs per bag, 2,000 pcs per carton. If your shipment routes through humid climates or long storage, say so in the RFQ — packing upgrades are cheap at the factory and expensive as a claim.

Which quality tests should accompany a p hook and q hook shipment?

At minimum: sheath adhesion test; load test at rated tension; sheath dielectric strength where specified; salt spray 240 h on the metal core. Type-test certificates qualify the design; ask additionally for per-batch routine records, which are what tell you what actually shipped.

What goes wrong in the field with cheap p hook and q hook?

The recurring failure modes are: sheath splitting at the barrel ends; sleeve sliding along the barrel; rust bleeding from under the sheath. None of them are visible at goods-in, which is why the specification and the batch records matter more than the sample.

A note on honest specifications

Every answer above comes from the same product data behind the specification guide and the inspection checklist for this product. If your question is not answered here, put it in the quotation request — a supplier who answers an awkward question narrowly and honestly is worth more than one who answers everything with “yes, no problem”.

When this is the wrong product

P hook and q hooks are the right tool when FTTH cable support in telecom cabinets; aerial distribution cabling. If your situation is closer to “manhole and handhole cable management” — or you are not sure — read the category guide first and check whether a sibling product fits better before you price the wrong one.